Reference:5513

Submariner › 5513

Rolex Submariner 5513

The 5513 is the long-running no-date Submariner, made from about 1962 until 1989. Some catalogues date the final examples to 1990. Early watches have gloss gilt dials, the middle of the run is mostly matte, and the last versions return to gloss with white-gold surrounds.

Core facts

detail	value
reference	5513
family	Submariner (no date, non-chronometer)
production	approximately 1962 to 1989; some catalogues date final examples to 1990
movement	caliber 1530 (early), 1520 (long run)
case	stainless steel, 40mm, crown guards
water resistance	200m / 660ft as marked on the period dial; seal condition is watch-specific
crystal	acrylic
position	non-chronometer counterpart to the 5512

Where it sits in the line

Rolex sold the 5513 alongside the 5512. The 5512 was the chronometer-certified no-date model; the 5513 was the non-chronometer version and normally used a two-line dial.

Production outline

Early gilt

The first 5513 watches use a glossy black lacquer dial with gilt printing rather than the later matte style. Surviving examples place this phase at about 1962–1966.

Late gilt and Bart Simpson

5513 Bart Simpson coronet gilt gloss dial

Late gilt examples lead into the Bart Simpson branch, collector shorthand for a coronet whose points look flatter and wider than the earlier shape. The dial also has recurring type details that help separate it from the preceding gilt style.

Matte run

5513 matte dial sequence — meters first to Maxi V

Most surviving 5513 examples have matte dials. The matte years run from about 1966 to 1984, starting with meters-first dials (200m before 660ft), continuing through serif and non-serif variants, and ending with the Maxi branch and its larger lume plots.

Late gloss

Late gloss 5513

In the final years, the 5513 picks up a gloss dial with white-gold surrounds while keeping the acrylic no-date case. Examples from 1988 and 1989 show this configuration, often paired with a 93150 bracelet.

Movement notes

Caliber 1520 in the case, caseback removed

Early 5513 watches are documented with caliber 1530; the long production run is associated with caliber 1520. The handover is not pinned to a single dated cutover, and a serviced watch may no longer have its original movement.

Early non-COSC 5512 examples share the 1530, consistent with the 5513's position as the non-chronometer alternative to the 5512. The 5513 never used the 1560 or 1570 chronometer calibers of the 5512 track.

Dial timeline

5513 classic coronet gilt gloss dial

The dial timeline has three broad phases: early gilt, the long matte middle, and late gloss at the end.

Serial bands below are collector approximations based on caseback stamps and surviving examples, not Rolex factory records. Watches near any transition point can blur the expected specification.

genre	approx. years	quick tell	why it matters
Explorer dial	1962–1965	3-6-9 numerals on an early gilt dial	distinct early branch, often linked to UK-market examples
Underline / Double Swiss Underline	1963–1964	underline print and early pointed crown-guard context	narrow transitional window around the radium-to-tritium change
Open chapter ring gilt	1964–1966	gloss gilt dial with open outer minute track	main late-gilt commercial branch
Bart Simpson	around 1966	wide, flat coronet in late gilt production	late-gilt subtype identified by its coronet and type details
Meters-first matte	1966–1970	depth rating reads 200m before 660ft	first matte generation
Serif / non-serif matte	1970–1976	feet-first matte dial with marker and font diagnostics	core middle run of the reference
Pre COMEX	1976–1977	fat coronet and unusual "=" placement	brief bridge between standard matte and Maxi dials
Maxi Mk I–V	1977–1984	larger lume plots and mark-specific text alignment	late-matte subgroup divided into five dial marks
Late gloss	1984–1990	gloss dial with white-gold surrounds	bridge into the modern Submariner look

Explorer dial (approx. 1962–1965)

Explorer-dial 5513

Explorer-dial 5513 examples exist from the earliest production run. The layout replaces the standard rectangular lume plots at 3, 6, and 9 o'clock with Arabic numerals, while keeping slim luminous batons at the remaining hours. Dial text is reduced in size to give the numerals room.

Stephen Pulvirent's Hodinkee Reference Points piece on the Submariner notes that Explorer-dial Submariners "seemed to have been made for the UK market"; the UK concentration has never been conclusively explained. Surviving examples are often linked to UK distribution channels, and Explorer-dial 5512 examples from the same period show a similar pattern. Phillips has described a small group of Explorer-dial Submariner lots across references 6200, 6538, 5510, 5512, and 5513; auction counts are not a production total.

Underline (approx. 1963–1964)

• 
  Underline 5513
• 
  Double Swiss underline 5513

Certain early gilt 5513 dials carry an underline (a short printed line) just below the depth rating and "Submariner" text at six o'clock. These are transitional pieces that appear across several Rolex sport references in the same period; the marking is a Rolex-wide production phenomenon. Most Underline 5513 examples also carry Cornino (pointed) crown guards, consistent with their position in early production.

Double Swiss Underline (approx. 1963)

A rarer sub-variant of the Underline. Here the underline sits beneath the Rolex signature at 12 o'clock rather than at 6 o'clock, and the dial carries two "Swiss" text printings at the bottom: one gilt, in line with an open chapter ring, and one white just below it. The Double Swiss phenomenon appears across multiple Rolex references from this period. The Double Swiss Underline 5513 is documented in collector literature among the later examples with pointed (Cornino) crown guards. Rounded guards appear in nearby production, but the exact transition remains approximate.

Gilt, Open Chapter Ring (approx. 1964–1966)

• 
  Gilt-dial 5513 close-up
• 
  Open chapter ring 5513

Once the Underline and Double Swiss variants are past, the main gilt 5513 body uses an open chapter ring: the gilt hash marks around the dial perimeter are not connected by a solid ring on the outer edge. The openness is the visual diagnostic. The outer perimeter of the minute track shows either hash marks that float free or hash marks that connect into a closed band. No underline, no exclamation marks.

Bart Simpson (approx. 1966, serials approximately 1.4M–1.5M)

Bart Simpson dial — wider, flatter coronet points

Late gilt production brings what the collector community and auction catalogues call the Bart Simpson dial. The coronet has wider, flatter points that give the dial its collector name. Typical serial range is 1.4M to 1.5M, with examples appearing as early as 1.3M and as late as 1.6M. Bart Simpson 5512 examples also exist but are much rarer by volume.

Beyond the coronet shape, the Bart Simpson dial has several authentication details that distinguish it from the classic coronet gilt dial that immediately preceded it:

• The "L" in ROLEX sits to the left of center, underneath the coronet.
• The "P" in PERPETUAL falls directly under the extended part of the serif on the "L" in ROLEX.
• In the depth rating, the "2" and "0" align directly over the "S" and "U" in SUBMARINER.
• The 6s in the depth rating are open.
• The horizontal bars of the "f" and "t" in "ft" are aligned (co-linear).

The classic coronet gilt dial that immediately precedes the Bart Simpson (typically in the 1.1M to 1.3M serial range, with examples in the very late 1.0M range) differs on several of these points:

• The "P" in PERPETUAL sits farther to the left, positioned underneath the "L" in ROLEX rather than under the serif extension.
• The shape of the letter "S" in SUBMARINER is distinctly different from the Bart Simpson version.
• The horizontal bars of the "f" and "t" in "ft" are not aligned.
• The coronet itself has cleaner, more defined lines compared to the Bart Simpson's wider, flatter points.

Some overlap exists during the transition between the classic coronet and the Bart Simpson dial. The classic coronet dial is also commonly seen with an underline in serial ranges corresponding to 1963.

Matte, Meters First (approx. 1966–1970, serials approximately 1.6M to 2.2M)

• 
  Flat tritium (late)
• 
  Dome tritium (mid)
• 
  Thin tritium (early)
• 
  SWISS T<25 spanning five hash marks
• 
  Meters first depth rating detail
• 
  Meters first dial detail

The transition from gilt-gloss to meters-first matte dials started around the 1.6M serial range (approximately 1966). By serial 1.7M (1968), the meters-first matte dial was in full production. The depth rating puts metric units first ("200m = 660ft"), which is why collectors call them meters-first. The shift to feet-first depth ratings overlaps in the 2.2M serial range (late 1969 to early 1970), where both meters-first and feet-first dials appear.

Authentication details for the Meters First dial:

• The "L" in "ROLEX" has very little if any serif on top and is centered under the coronet.
• The 6s in the depth rating are semi-open: the top of the 6 appears rotated a couple of degrees clockwise (may require a 10x loupe to confirm).
• The "S" in "SUBMARINER" has a characteristic shape: the top part is straight across, and the middle horizontal portion sits closer to the top than the bottom.
• "SWISS - T < 25" at the bottom of the dial spans five minute hash marks. This is wider than subsequent matte dials, which span only three hash marks. (A short run of 5512 meters-first matte dials had "SWISS - T < 25" across only three hash marks, but no 5513 example with this narrower spacing is known.)

Tritium application varies across the meters-first production run: early examples have a very thin layer of tritium that can appear very white and may be hard to detect without a loupe; mid-production examples show more dome-like tritium plots; late production examples have tritium applied in a flat layer, similar to the style used throughout the 1970s.

Non-serif, first run (late 1969–1970, serials approximately early 2.0M)

• 
  Serif vs non-serif timeline
• 
  Serif hour marker flair
• 
  Non-serif hour marker corners

The first non-serif dials appear in the very early 2.0M serial range (late 1969 to early 1970), immediately following the meters-first dials. The depth rating switches to feet first ("660ft = 200m"). The "=" sign sits above and slightly to the right of the "A" in "SUBMARINER." "SUBMARINER" is printed below the depth rating. The 6s in the depth rating are open.

The non-serif dial is identified by the corners of the 3, 6, and 9 o'clock hour markers, which form perfect 90-degree angles with no extensions or flair. The middle horizontal stroke of the "E" in "ROLEX" has an abundance of serif at its end. The "P" in "PERPETUAL" is shifted to the left relative to the "L" in "ROLEX" above it.

Serif (1970–1973, serials approximately early/mid 2.0M to late 3.0M/early 4.0M)

Serif dials introduce small extensions (sharp points or "flair") at the corners of the 3, 6, and 9 o'clock hour markers. This is the distinguishing feature from the non-serif dial. The middle horizontal stroke of the "E" in "ROLEX" has no serif at its end, the opposite of the non-serif dial. The depth rating remains feet first, with the "=" sign above and slightly to the right of the "A" in "SUBMARINER." "SUBMARINER" is printed below the depth rating.

Tritium was hand-applied and can cover the serif extensions on hour markers, making a Serif dial look like a Non-serif. When the hour markers are ambiguous, the "E" in "ROLEX" resolves it: abundance of serif on the middle stroke means non-serif dial; no serif on the middle stroke means serif dial.

Serif dials recur throughout the early-to-mid matte records and are identified by the marker and letterform details described above.

Non-serif, second run (1973–1976, serials approximately late 3.0M to early/mid 5.0M)

The dial printing returns to non-serif text in the mid-1970s. The transition back from serif to non-serif began in the late 3.0M serial range. This second non-serif phase runs until the Pre COMEX dial appears in the early-to-mid 5.0M range. The same hour-marker and "E" in "ROLEX" diagnostics apply as in the first non-serif run.

Pre COMEX (approx. 1976–1977, serials approximately 5.0M)

• 
  Pre COMEX dial detail
• 
  Pre COMEX text detail

The term "Pre COMEX" was coined by Ed Delgado on the Vintage Rolex Forum on October 24, 2008, to describe dials with characteristics very similar to some COMEX 5514 dials. This dial sits between the second non-serif run and the Maxi I.

Authentication details:

• The coronet is somewhat smudgy and noticeably fat at the bottom, wider than the Maxi I coronet that follows.
• The top of the "L" in "ROLEX" has a tremendous amount of serif and sits to the left of center under the coronet.
• The 6s in the depth rating are open.
• The "=" sign in the depth rating sits above and to the left of center of the "A" in "SUBMARINER," unlike the placement on the other matte dials described here.
• "SUBMARINER" is printed below the depth rating.
• The "S" in "SUBMARINER" has a normal appearance (not the zig-zag shape seen on Maxi I and IV).

Quick identification: a smudge-like coronet with an "L" with abundant serif underneath, depth rating above "SUBMARINER," and the "=" sign above and slightly to the left of the "A." That combination identifies a Pre COMEX dial.

Maxi MK I through MK V (1977–1984)

• 
  Maxi I dial
• 
  Maxi II dial
• 
  Maxi III lollipop dial
• 
  Maxi IV dial
• 
  Maxi V dial
• 
  5513 Maxi dial
• 
  5513 Maxi dial detail

The Maxi era introduces larger lume plots and bolder printing. Collectors use “Maxi” for the late-1970s large-plot matte dials and divide the phase into five marks, MK I through MK V, using plot size, text position, and typography. The dial details below describe the commonly published distinctions; serial overlap and service replacements mean they should not be used alone to date a watch. All Maxi dials have coronets that are narrower at the bottom than the Serif and Pre COMEX dials. All Maxi dials have open 6s in the depth rating. All Maxi dials except the Maxi I have “SUBMARINER” printed above the depth rating.

Two identifiers recur across Maxi dials and serve as quick sorting tools:

The "=" sign position relative to the "A" in SUBMARINER sorts Maxi I through V quickly: Maxi I has it directly above the "A"; Maxi II directly below and in the middle of the "A"; Maxi III uses the "200m" alignment instead, with the two 0s in "200m" lining up under the "N" and "E" of "SUBMARINER"; Maxi IV directly below the "A" but shifted slightly to the right; Maxi V directly below and in the middle of the "A."

The "S" shape in "SUBMARINER" is the second quick sort. A zig-zag S (resembling a backwards capital Z) appears on Maxi I and Maxi IV. A normal S appears on Maxi II, Maxi III, and Maxi V.

MK I (1977–1978, serials early/mid 5.0M to early 6.0M): The last matte dial with "SUBMARINER" printed below the depth rating. Tritium hour plots are very large but do not touch the minute marks. The coronet is tapered and slender at the bottom, unlike the preceding Pre COMEX's fat coronet. It carries the zig-zag S in "SUBMARINER." The "=" sign sits directly above the "A" in "SUBMARINER."

MK II (1978, serials 5.0M to early 6.0M): The first matte dial with "SUBMARINER" printed above the depth rating. "SUBMARINER" is shorter in length than the depth rating below it. The "f" in the depth rating lacks serif. Normal "S" in "SUBMARINER." The "=" sign sits directly below and in the middle of the "A."

MK III (approximately 1978, serials 5.0M to 6.0M): Large tritium hour plots that often appear to touch the five-minute hash marks (nicknamed "lollipop"), though under magnification they do not always make contact. "SUBMARINER" above the depth rating and shorter in length. Large open 6s. The "f" in the depth rating has a distinctive serif. The two 0s in "200m" line up directly underneath the "N" and "E" in "SUBMARINER."

MK IV (approximately 1981, serials late 6.0M to late 7.0M): "SUBMARINER" above the depth rating and shorter in length. Shares the zig-zag S with Maxi I. The "=" sign sits directly below the "A" but shifted slightly to the right, distinguishing it from Maxi II where it is centered.

MK V (serials 7.0M to 8.0M, through approximately 1984): "SUBMARINER" printed above the depth rating, but unlike Maxi II–IV, the "SUBMARINER" text is longer than the depth rating below it — a unique characteristic among Maxi dials. Open 6s. The "f" in the depth rating lacks serif. The "=" sign sits directly below and in the middle of the "A." Production continued until approximately 1984 when the black gloss dial with white-gold surrounds was introduced.

Gloss (1984–1990)

The final 5513 dials return to a glossy finish, with white-gold surrounds around the hour markers rather than the gilt printing of the early era. This late-gloss phase keeps the acrylic crystal and no-date layout.

Dial map

Collectors usually split the 5513 into four broad groups: early gilt, late-gilt Bart Simpson, the long matte middle, and late gloss. Named sub-variants sit inside those groups.

• 
  Gilt dial, full view
• 
  5513 dial close-up

Case, bezel, crystal, and crown

• 
  Bezel and case flank on a gilt-dial example
• 
  Crown and case profile
• 
  Caseback, exterior
• 
  Inside caseback with service markings

The 5513 case form stays broadly stable across the run: a 40mm crown-guard case, acrylic crystal, and rotating dive bezel. The case changes less than the dial. Inserts, crowns, and later service parts are the main originality checks.

Crown guard transition

The first 5513s start with pointed Cornino crown guards inherited from the 5512. Rounded guards take over by the mid-1960s and stay there through the rest of the run. The shift covers a transition zone of overlapping production rather than a single dated cutover.

Dial originality and service dials

Dial originality needs particular care on the 5513. Long production and hard service life mean correct dials, later service dials, and incorrect replacements all circulate on honest-looking cases.

Matte 5513 dials from the 1970s and 1980s are frequent service-replacement territory. Font weight, text sizing, and depth-rating format should all match the case period. A dial that looks too fresh for the case deserves scrutiny.

Maxi dials are often replaced or misidentified. The mark should match the serial-era evidence, lume-plot size, and text arrangement.

The lower dial text is one of the easier cross-checks. A case and dial from different eras often give themselves away here.

Early gilt 5513 dials carry the same originality risk as early 5512 dials. Coronet shape, chapter-ring style, and print character should match the period.

Compare the dial with the case period. A replacement dial changes what can be said about the watch as delivered.

Bracelets, end links, clasps, and packaging notes

• 
  Folded Oyster bracelet and clasp
• 
  Meters-first matte 5513 on Oyster bracelet
• 
  Late gloss 5513 on Oyster bracelet

bracelet	end links	note
7206	80	early rivet-era fitment
9315	280 or 380	documented by the early 1970s
93150	580	late-run fitment and common later replacement

The table records documented fitment examples. A clasp code dates the bracelet rather than the watch head, and bracelet swaps across the long run are common.

USA-market C+I (Credit et Industrie) bracelets used hollow rivets while Swiss-market bracelets used solid pins. The distinction matters for authentication and feel, but not every surviving watch still carries its original bracelet.

Surviving 5513s frequently turn up with later 93150 bracelets, much later clasp stamps, and other mixed service parts. Packaging tracks the sale period and market rather than the reference number itself.

Special branches

• 
  Military-engraved 5513 caseback example
• 
  Commercial 5513 on Oyster bracelet
• 
  Early gilt 5513 on strap
• 
  Spider-dial 5513 example

Explorer dial

The Explorer-dial branch sits inside the early gilt run as a distinct collecting line. The dial-timeline section above covers the 3-6-9 layout and the UK-market skew; the provenance below anchors both.

Sotheby's 2020 Lot 377 carried a family-owned 1964 watch with caliber 1530, UK Garrard guarantee dated 1965, and later service papers. The Garrard provenance supports both the UK-market thesis and the date range.

MilSub

• 
  MilSub 5513
• 
  MilSub 5513 detail

British military 5513s are a separate group. Collectors shorten "military Submariner" to MilSub. Published examples include a South African Army-associated 5513 and a 1974 military 5513. British military casebacks use service codes such as 0552 for Navy issue and W10 for Army issue, with 923-7697 as the NATO stores code seen on issued examples.

Other naval or institutional claims need watch-specific caseback and procurement evidence before they can identify an individual watch. British military Rolex examples include modified 5513 watches, double-reference 5513/5517 watches, and the dedicated 5517. US Navy SEAL Tudor issue is a separate Tudor matter, not a Rolex 5513 branch.

Historical market and auction record

The 5513 record spans ordinary commercial watches, unusual dial branches, and military provenance. Auction descriptions often separate those categories, but a single lot cannot establish a general production rule or a watch's original configuration.

example	date / evidence	source use
Explorer-dial 5513, Sotheby's lot 377	circa 1964; caliber 1530; UK Garrard guarantee dated 1965	provenance example for the early Explorer-dial branch
South African Army-associated 5513	circa 1970; military caseback and bracelet documented in the Sotheby's lot	military-issue example; not a rule for every 5513

Explorer-dial, military, and early-gilt examples need provenance and component checks. A watch with a later dial, insert, crown, bracelet, or clasp should be described as a mixed or serviced example.

Mixed-parts watches are common. Documented spider-dial and bracelet-focused 5513 examples show replacement dials, inserts, crowns, later bracelets, and much later clasp stamps sitting together on one otherwise honest watch. Spider dial refers to a glossy dial with lacquer crazing; the effect turns up across a broad late-vintage band rather than a single year.

Related references

The 5513 sits inside the 5xxx Submariner family alongside the chronometer 5512 and the institutional 5514 and 5517. Two military and commercial branches use the 5513 case as their host: the COMEX program (Compagnie Maritime d'Expertises) issued 5513s to French saturation divers from the early 1970s, and the British military MilSub configuration ran on 5513 cases for the first two batches before the dedicated 5517 took over in the third.

• 
  5513 Submariner, whole watch
• 
  Late gloss dial
• 
  Caliber 1520
• 
  Inside caseback
• 
  Military-engraved caseback example

Sources

• The Vintage Rolex Field Manual — Colin A. White, Morning Tundra
• History of the Rolex Submariner - Part 2, The 55XX References and 1680 Date — Tom Mulraney, Monochrome
• The Rolex Submariner: A Complete Collector's Guide — Stephen Pulvirent, Sotheby's
• Rolex 5513 Submariner Review & Ultimate Buying Guide — Bob's Watches
• Explaining The Bart Simpson Rolex Submariner: Eric's Favorite Coronet — Eric Wind, Hodinkee
• Reference Points: Understanding The Rolex Submariner — Stephen Pulvirent, Hodinkee
• In depth-review Rolex 5512 Submariner — Edmond Saran, Le Monde Edmond
• Collector's Guide: What To Know About The Rolex Submariner Reference 5512 — Charlie Dunne, Wind Vintage
• Vintage Rolex Box reference guide list 1950 to mid 2000's — WatchProSite community, WatchProSite
• Rolex Submariner "South African Army", Ref 5513, Military Stainless Steel Wristwatch With Bracelet, Circa 1970 — Sotheby's, Sotheby's
• Rolex Submariner "Explorer Dial", Ref 5513, Stainless Steel Wristwatch With Rare Dial And Bracelet, Circa 1964 — Sotheby's, Sotheby's
• Rolex Submariner 5513 'Meters First' — Amsterdam Vintage Watches, Amsterdam Vintage Watches
• 1966 Rolex 5513 "Bart Simpson" Tropical Patina Submariner — Grey and Patina, Grey and Patina
• 1965 Rolex 5513 Gloss Gilt Submariner W/Box & Paper — Grey and Patina, Grey and Patina
• Vintage Rolex Submariner Ref 5513 Black Spider Dial — Bob's Watches editorial staff, Bob's Watches
• Vintage Rolex Submariner Ref 5513 Stainless Steel Bracelet — Bob's Watches editorial staff, Bob's Watches
• Vintage 1989 Rolex Submariner 5513 — Bob's Watches editorial staff, Bob's Watches
• Vintage Rolex Submariner 5513 Stainless Steel Oyster — Bob's Watches editorial staff, Bob's Watches
• Rolex Military Submariner Ref 5513 (1974) — Watches of Distinction, Watches of Distinction

• 5513 Matte Dial and Gilt-Gloss 5512 Submariner — Comprehensive Reviews — Beaumont Miller II, 5513mattedial.com