Rolex 3139 Oyster Perpetual

A checked version of this page, approved on 28 September 2026, was based on this revision.

Oyster → 3139

The 3139 is commonly called the Oyster Army because surviving examples are known with “ARMY” printed below the coronet. The reference also appears with other dial names and layouts, so the dial and its condition must be checked on the individual watch.

Core facts

detail	value
reference	3139
family	Oyster (WWII manual-wind)
production	about 1938–1947
case shape	cushion, heavy faceted lugs
case sizes	mid-sized approx. 30×30 mm × 11.5 mm (Antiquorum); larger approx. 30×35 mm
case material	stainless steel (all documented examples)
crown	screw-down "Oyster Patent"
crystal	acrylic
movement	Cal. 10½ Hunter or Cal. 710 (17 jewels, manual-wind; see movement section)
dial text	documented examples include "ROLEX OYSTER ARMY" below 12; other signed layouts are also recorded
dial variants	California (top), black glossy gilt, silvered with batons, matte black with green Arabic, luminous military layout
hands	Mercedes with luminous; blued pencil with radium
approximate units produced	c.3,000 (figure repeated in dealer and collector literature; not factory-confirmed)
military issue markings	no W.W.W. or broad-arrow marks are recorded on the examples cited here
known case numbers	106594 (c.1941), 212445, 214602, 244815 (1942), 244828 (1942), 244874 (c.1943), 245141 (c.1945), 275697, 275869, 381811, 382045 (catalogued "1930s," likely an indexing error)
auction results	see the dated lot table; currencies and condition vary

Where it sits in the line

The 3139 is a manual-wind cushion Oyster from the late 1930s and 1940s. It belongs to the group of non-Perpetual Oysters that Rolex continued to sell alongside the self-winding Bubbleback line. The available records do not establish a complete production map or a single sales channel for the reference.

The 3139 sits alongside other manual-wind Oysters of the period, including the tonneau-cased 3116 family, smaller-market Oysters, the 4220, and the 3359. Some surviving 3139 examples carry “ARMY” on the dial, while auction records also show other dial descriptions under the reference. The word is a useful identifier for one branch of the reference, not a complete description of every 3139.

The case form predates the war. The cushion Oyster descends from the 1926 Oyster catalog's original cushion shape, one of the two shapes (octagonal and cushion) Rolex launched the Oyster with, and both descend structurally from the three-piece hermetic screw-case patented by François Borgel in 1903, whose fifteen-year patent term had lapsed well before Rolex adopted the architecture. Some Oyster case histories associate early cases with C. R. Spillmann & Co. The cited 3139 lot records do not identify the case maker for every example, so the attribution should not be applied to the whole reference without a case hallmark. The screw-down crown that completed the system was registered in October 1925 by Paul Perregaux and Georges Perret, granted as Swiss patent CH 114948 in May 1926, and assigned through Spillmann to Hans Wilsdorf that July. By the late 1930s the cushion case was an older Oyster form. The reason Rolex used it for the 3139, and the intended balance between civilian and military buyers, is not documented in the sources checked here.

Rolex manufactured cases for Panerai in this same period, and the Panerai ref 3646 is a cushion-cased Rolex-made watch of the wartime years, sharing the same Borgel-derived Oyster cushion ancestry as the 3139 (see The Panerai 3646 relationship below for how the two compare).

The "Army" question

Black gilt Army-marked dial, 1943 example

On the examples described by Antiquorum and dealers, “ARMY” appears below “ROLEX OYSTER,” with “SWISS MADE” near six o’clock. Dealer and forum descriptions sometimes call the watch military-issued and repeat a production figure of about 3,000, but the checked auction records do not establish a government contract or a factory total.

The markings tell a different story. The eleven Antiquorum examples cited in this article do not show W.W.W. or broad-arrow marks. That absence argues against treating those lots as documented British Ministry of Defence issue watches. Caseback names or numbers may be later ownership or service engravings; the auction descriptions do not prove when each engraving was made.

The evidence supports military styling, but it does not identify a government contract or prove that every “ARMY” example was sold through the same channel.

The cited sources do not identify the retailers or markets that carried the 3139.

Case and construction

The 3139 case is a cushion form with curved edges. The Antiquorum 2006 lot measures 30 × 30 mm and 11.5 mm thick; other records describe a larger variant. “Tool” and “dress” are collector descriptions rather than factory categories. The lugs are the signature visual element: heavy, faceted, soldered to the case rather than milled integrally, meeting the case at sharp angles and stepping back to the strap attachment with distinct bevels. That construction separates the 3139 visually from the smaller cushion Oysters of the 1920s and 1930s, which carried thin wire lugs.

The case carries the reference 3139 engraved between the lugs on the underside, and the standard Oyster caseback text on the interior. The back is a screw-down three-piece element consistent with Oyster architecture. The crown is a screw-down Oyster Patent crown, threaded to the case tube.

Two case sizes are documented under the same reference: a more common mid-size around 30x30mm and a larger 30x35mm variant. Both are legitimate. Buyers should measure the watch rather than assume one fixed size. Whether the two ran in parallel, in sequence, or for different markets is not documented in the surfaced record.

Known case numbers anchor the reference to specific production years. Antiquorum's own lot records date case 244828 and 244815 to 1942, and place 106594, 212445, 214602, 275697 and 381811 in the 1940s without a more precise year. Dealer listings separately date case 244874 to about 1943 and 245141 to about 1945; case 275869 appears in the dealer record without a firm date. Antiquorum catalogued case 382045 as “1930s,” while the article’s working production range begins around 1938. The discrepancy is left as a catalogue inconsistency; the available record does not prove whether the date or the reference attribution is wrong.

The movement question

Surfaced listings attribute the 3139's movement in two ways. Some sources describe the calibre as the 10½-ligne Hunter, a 17-jewel manual-wind movement with straight-line lever escapement, Rolex-patented Superbalance, Breguet overcoil hairspring, centre sweep seconds, and adjustment in six positions for all climates. Others describe the calibre as the Rolex 710, a 17-jewel manual with 18,000 bph, 44-hour power reserve, and two-position adjustment.

The records use both “10½” and “710” descriptions, but the checked sources do not establish that every 3139 movement bearing one label is the same grade as one bearing the other. Jewel counts and adjustment descriptions also differ between lots, so the movement should be checked on the individual watch.

The documented examples are manual-wind and use the screw-down Oyster crown. Antiquorum’s 2006 lot is described as a 17-jewel 10½ movement; other listings give different jewel counts and specifications, so a single specification should not be assumed for every 3139. The Superbalance and Breguet overcoil specifications, where present, match the precision-grade manual Rolex produced across its better late-1930s Oysters. There is no shock protection of the Incabloc or KIF type; shock-protected Rolex calibres arrive later in the 1940s with the A.296, after the 10½ Hunter base.

Dial variants

Army-marked gilt dial detail
Numerals and hands close-up
A 1941 example with a silvered dial, applied Arabic numerals and subsidiary seconds at 6, on a brown leather strap.

Auction and dealer records show several dial layouts under the 3139 reference. The surviving evidence is not a complete factory variant list, and the effect of a dial on price depends on originality, condition, and the individual sale.

The California dial is the two-tone configuration: Roman numerals on the upper half, Arabic numerals on the lower half, radium luminous plots at the tips, and a railroad-style minute track. The California layout is described in surviving examples with Roman numerals on one half and Arabic numerals on the other. “California,” “Error-Proof,” and “High Visibility” are labels used in later collecting and dealer literature; the checked sources do not establish a Rolex catalogue name or a fixed price premium.

The black glossy gilt variant uses a black enamel or lacquer base with gilt (gold-coloured) printing for the dial text, hour markers, and minute track. Black glossy gilt examples use gilt printing against a dark dial. Auction results show that such examples can sell above some other recorded configurations, but the small sample does not support a general ranking.

A silvered dial with baton indices is the more conservative treatment: silvered base, applied or printed baton hour markers, a simple minute track, and blued steel hands. The silvered layout is less overtly military in appearance. The cited records do not establish its original sales channel or a fixed price relationship to other dials.

A matte black dial with green Arabic numerals is the tool-watch configuration: matte black base, Arabic hour numerals in luminous or green-painted radium, with a corresponding luminous handset. Reads very directly as a wartime military-themed dial. This layout appears in dealer and auction records, but the available documentation is thinner than for the gilt examples. Its original production context is not established here.

Some examples have luminous Arabic or baton markers and an inner 24-hour track. Dealers often call this a military layout, but dial appearance alone does not prove government issue.

Hands come in two principal configurations. Mercedes hands with luminous fill (the three-spoke hour hand that became the Rolex tool-watch signature from the Submariner onward) appear on the military-layout and matte-black 3139s. Blued pencil hands with radium appear on the silvered and some gilt configurations. Matching ageing can support an originality assessment, but mismatched ageing does not by itself prove that a hand or dial is a service replacement.

The Panerai 3646 relationship

Rolex manufactured Panerai's cases during the Second World War. The Panerai reference 3646, produced from 1938 through the mid-1940s as a diver's watch for the Italian Royal Navy's underwater assault units (the Decima Flottiglia MAS), is a Rolex-made cushion case in a 47 mm pocket-watch-derived format, fitted with wire lugs and a California dial. It carries a Cortébert movement rather than a Rolex calibre, because Panerai specified the ebauche.

The 3139 and Panerai 3646 share a cushion-case outline and a connection to Rolex case production in the period. The checked sources do not establish that they share an identical case architecture or direct component lineage. The resemblance is most apparent in the cushion geometry (curved-edge square form, not round) and in the three-piece hermetic screw-case construction. The resemblance is visible in photographs, but visual similarity is not proof of shared components.

The 3139 and Panerai 3646 may share visual DNA, but they are not near-twins. The 3646 is a much larger military dive watch. The 3139 is a normal-wrist Oyster with different movement, crown system, and market purpose.

Auction and dealer record

The auction record is small and spans several currencies and dial descriptions. Results should be read lot by lot rather than as a single market tier. Antiquorum's own catalog documents eleven sales between 1990 and 2025, the deepest single auction record surfaced for the reference. The recorded lots include silvered, gilt, black, and other described layouts. Condition, originality, case size, and provenance vary between lots, so the table does not establish a stable price hierarchy.

Venue	Date	Lot	Case no.	Material	Dial	Estimate	Result
Antiquorum, Hanae Mori Building	1990-12-15	13	—	Steel	Matte silver, "tortue" shape, radium Arabic	JPY 150,000–200,000	JPY 226,250
Antiquorum Geneva (Mondani Collection)	2006-05-14	39	244828	Steel	Pink gilt, "Army," Mercedes hands	CHF 4,000–6,000	CHF 7,080
Antiquorum Geneva	2008-03-16	26	—	Steel	Pink gilt, "Army," feuille hands	CHF 2,300–2,800	CHF 2,400
Antiquorum New York	2008-12-11	55	—	Steel	Matte silver, 24-hour subdial, "Oyster Chronometer, Observatory"	USD 2,000–2,500	USD 2,400
Antiquorum New York	2011-12-07	408	381811	Steel	Matte silver, "Army"	USD 1,500–2,500	Unsold
Antiquorum Geneva	2014-05-11	195	214602	Steel	Matte silver, "Oyster Everest Observatory"	CHF 2,000–3,000	CHF 1,250
Antiquorum Geneva	2014-11-08	826	382045	Steel	Black, luminous Arabic, "Army"; case catalogued "1930s"	CHF 2,000–4,000	CHF 2,500
Antiquorum Hong Kong	2015-10-25	189	244815	Steel	"Army"	HKD 15,000–25,000	Unsold
Antiquorum Geneva	2024-11-09	105	106594	Steel	"BOW TIE," on a ClewCo elastic riveted bracelet	CHF 2,000–4,000	CHF 4,000
Antiquorum Geneva	2025-05-10	148	275697	Steel	"Oyster Chronometre"	CHF 1,000–2,000	CHF 5,625
Antiquorum Geneva	2025-05-10	149	212445	Steel	Black, "Oyster Elegante"	CHF 1,000–2,000	CHF 2,500

Eleven lots are listed across 1990–2025. They use four currencies and include unsold lots, so the results are not combined into one price line. Within each sale's own currency, results cluster in the low thousands, with the Mondani Collection's pink gilt "Army" the strongest CHF result at 7,080. Two of the eleven lots — the 2011 New York "Army" and the 2015 Hong Kong "Army" — carry no recorded hammer price and are catalogued as unsold or without a published result.

Collecting considerations

Dial originality is a central point to check on a 3139, but the relative effect on price varies by example and sale. An original dial, even with honest wear, reads meaningfully different from a refinished example, and the gap in collector interest is substantial. Printing, luminous plots, and ageing can help an examiner compare a dial with known examples. They are not by themselves proof of originality and should be assessed with the movement, case, and provenance. Where dial originality is uncertain, the conservative position is to price the watch as refinished and treat any original-dial upside as a bonus.

Case size matters practically on the 3139. Buyers expecting a mid-sized 30×30 mm watch who encounter a 30×35 mm example (or vice versa) will find the wrist presence meaningfully different. Measure the case across both axes before assuming which size is in the box.

On case numbers and dating, the surfaced serials cluster in the 244,000–245,000 range for the earliest wartime examples (244815, 244828, 244874, 245141) and extend across a wide later range (106594, 212445, 214602, 275697, 275869, 381811, 382045) for the bulk of documented production. Dating via case number is reasonably firm within the early cluster; the later cases are anchored mainly by each lot's own catalogue estimate rather than by serial sequence. Antiquorum's "1930s" attribution on 382045 is the one anomaly in the surfaced record; the consensus reading places that case in the mid-1940s.

Caseback engravings — service numbers, names, dates — are almost always owner additions rather than factory issue marks. A serviceman's name, service number, unit, or date of issue engraved on the back is a provenance detail, separate from any question of government issue. Where such an engraving ties to a documented serviceman, it is an attractive provenance layer; where it is present but undocumented, it is neutral. The absence of a broad arrow or W.W.W. is not a defect; no 3139 left the factory with those marks.

The movement should be signed with the Rolex wordmark and carry seventeen jewels, the 10½ Hunter or 710 architecture, and manual-wind operation via the Oyster crown. A replacement movement of a different architecture (automatic, larger calibre number, or different jewel count) indicates a service substitution somewhere in the watch's history.

Polish condition is the last check, and it matters. The faceted lugs are the 3139's defining visual feature, and they do not survive aggressive polishing. An unpolished 3139 with sharp lug facets reads very differently from a polished example where the facets have rounded into continuous curves. Case sharpness affects condition assessments, but the listed sales do not establish a fixed premium for an unpolished case or a particular dial variant.